Produktbeskrivelse
Produktbeskrivelse
1, Our Chain types: Agricultural roller chain, hollow pin conveyor chain, sugar industry chain, cane feeder and washing table chain, welded steel chain, bakery industry chain, weld steel drag chains,coil conveyor chain, palm oil chain etc;
2, Main materials: It is 40Mn. 40Cr, 45Mn alloy steel, SUS304, and POM Plastic for plates, 10#, 20#, 20CrMnMo, 30CrMnTi for pins and rollers;
3, Heat treatment: Carburizing, Austemper Stressing, nitro-caburizing harden etc;
4, Surface: Shot peening, black, blue or original;
Detailed Photos
For example of WH78, WH82, WH124, WH111, WH106, WH110, WH132, WH150, WH155
Produktparametre
Emballage og forsendelse
plastic bag+carton+ OSB Case
Shipping way: these products will be shipped to your local port by sea, these also could be sent to your specific address by air.
Vores fordele
Our chains could be customized according to your actual order quantity, actual drawing and actual requirement. We have own chain process workshop, heat treatment workshop, process equipments and experienced designers.
(01)Assembled workshop
(02)Punching plate workshop
(03)Plate fabrication workshop
(04)Heat treatment workshop
(05)Shot peening workshop
(06) our warehouse
After Sales Service
Our products can be repaired or replaced the new parts with free cost in six months.
| Materiale: | Alloy |
|---|---|
| Struktur: | Svejset kæde |
| Overfladebehandling: | Carburizing and Quenching |
| Kædestørrelse: | 153.67mm |
| Funktion: | Varmebestandig |
| Bush Diameter on Inner Link: | 44.50mm |
| Tilpasning: | Tilgængelig | Tilpasset anmodning |
|---|
Can a conveyor chain be used in cleanroom environments?
Yes, conveyor chains can be used in cleanroom environments with proper selection and design considerations. Cleanroom environments require stringent control of airborne particles, such as dust, microbes, and contaminants, to maintain high levels of cleanliness. Here are some factors to consider when using a conveyor chain in a cleanroom:
1. Materialevalg:
– Choose a conveyor chain made from materials that are compatible with cleanroom requirements. Stainless steel, plastic, or special coatings are commonly used for their clean and non-contaminating properties.
– Avoid materials that generate excessive particles or contaminants, such as certain types of lubricants or chain coatings.
2. Design Considerations:
– Design the conveyor chain system to minimize particle generation. This includes smooth surfaces, rounded edges, and avoiding areas that can trap or accumulate particles.
– Use sealed or enclosed chain designs to prevent the release of lubricants or contaminants.
– Consider the integration of additional features, such as covers or guards, to further protect the chain and prevent particle ingress.
3. Cleaning and Maintenance:
– Establish a cleaning and maintenance protocol specific to the cleanroom environment. This may include regular cleaning and sanitization procedures to maintain cleanliness standards.
– Use cleaning agents and procedures that are approved for cleanroom use and do not introduce contaminants.
– Regularly inspect the conveyor chain system for any signs of wear, damage, or contamination. Promptly address any issues to ensure the chain’s reliability and cleanliness.
4. Compliance with Cleanroom Standards:
– Ensure that the conveyor chain system meets the cleanliness and particle generation requirements of the specific cleanroom standards or classifications in which it will be used.
– Comply with relevant industry guidelines and regulations, such as ISO standards, when selecting and using conveyor chains in cleanroom environments.
By considering these factors and implementing proper material selection, design considerations, cleaning protocols, and compliance with cleanroom standards, a conveyor chain can be effectively used in cleanroom environments while maintaining the required cleanliness levels.
Hvad er fordelene ved at bruge en transportkæde af plastik?
Transportkæder af plastik tilbyder adskillige fordele i forhold til traditionelle metalkæder. Her er nogle af de vigtigste fordele:
1. Korrosionsbestandighed: Plastikkæder er meget korrosionsbestandige, hvilket gør dem ideelle til anvendelser i fugtige eller ætsende miljøer. De ruster ikke eller forringes, når de udsættes for fugt eller kemikalier.
2. Letvægt: Plastikkæder er betydeligt lettere end metalkæder, hvilket gør dem nemmere at håndtere og installere. Deres lette vægt reducerer transportbåndssystemets samlede vægt og kan resultere i energibesparelser under drift.
3. Lav støj i drift: Plastikkæder genererer mindre støj sammenlignet med metalkæder, hvilket fører til et mere støjsvagt arbejdsmiljø. Dette kan være særligt fordelagtigt i industrier, hvor støjreduktion er vigtig, såsom fødevareforarbejdning eller emballage.
4. Reduceret friktion og slid: Plastikkæder har selvsmørende egenskaber, som reducerer friktion og slid. Dette resulterer i lavere vedligeholdelseskrav og længere kædelevetid. Den glatte overflade på plastkæder minimerer også risikoen for produktskader under transport.
5. Fleksibilitet og modularitet: Plastkæder kan nemt tilpasses og designes til at passe til specifikke krav til transportbåndssystemer. De tilbyder fleksibilitet med hensyn til længde, bredde og konfiguration. Derudover er plastkæder ofte modulære, hvilket muliggør nem udskiftning af beskadigede eller slidte sektioner uden at udskifte hele kæden.
6. Omkostningseffektiv: Transportkæder af plastik er generelt mere omkostningseffektive sammenlignet med metalkæder. De er ofte billigere at fremstille og tilbyder en længere levetid med minimale vedligeholdelseskrav, hvilket resulterer i lavere samlede omkostninger.
7. Kemisk resistens: Plastikkæder er modstandsdygtige over for en bred vifte af kemikalier, hvilket gør dem velegnede til anvendelser, hvor eksponering for aggressive stoffer er en bekymring. De kan modstå kontakt med olier, syrer, alkalier og forskellige rengøringsmidler.
Samlet set omfatter fordelene ved at bruge en transportkæde af plast korrosionsbestandighed, letvægtsdesign, lav støj i drift, reduceret friktion og slid, fleksibilitet, omkostningseffektivitet og kemisk resistens. Disse fordele gør plastkæder til et populært valg i forskellige brancher, herunder fødevareforarbejdning, emballage, lægemidler og logistik.
What are the common causes of conveyor chain failures?
Conveyor chain failures can occur due to various reasons, and identifying the root cause is crucial for preventing future issues. Here are some common causes of conveyor chain failures:
- Lack of Lubrication: Insufficient or improper lubrication can lead to increased friction and wear on the chain components, resulting in premature failure.
- Excessive Load: Overloading the conveyor chain beyond its rated capacity can cause excessive stress and strain, leading to chain elongation, deformation, or link breakage.
- Misalignment: Improper alignment of the conveyor chain can cause uneven loading and excessive wear on specific areas, leading to chain failure.
- Environmental Factors: Harsh operating environments, such as high temperatures, corrosive substances, or abrasive materials, can accelerate chain wear and corrosion, leading to failure.
- Foreign Objects: The presence of foreign objects or debris on the conveyor system can interfere with the movement of the chain, causing jamming, binding, or chain damage.
- Poor Maintenance: Inadequate maintenance practices, such as irregular inspections, failure to address minor issues promptly, or neglecting to replace worn components, can contribute to chain failures.
- Incorrect Installation: Improper installation, including incorrect tensioning, misalignment, or using incompatible components, can result in premature chain failure.
- Fatigue and Wear: Continuous operation over time can lead to fatigue and wear in the chain, especially in high-speed or heavy-duty applications, resulting in eventual failure.
Regular maintenance, proper lubrication, adequate training for operators, and adherence to manufacturer guidelines can help mitigate these common causes of conveyor chain failures. Conducting routine inspections, promptly addressing issues, and replacing worn components can also significantly extend the life of the conveyor chain.
editor by CX 2023-10-24
