제품 설명
제품 설명
1, Our Chain types: Agricultural roller chain, hollow pin conveyor chain, sugar industry chain, cane feeder and washing table chain, welded steel chain, bakery industry chain, weld steel drag chains,coil conveyor chain, palm oil chain etc;
2, Main materials: It is 40Mn. 40Cr, 45Mn alloy steel, SUS304, and POM Plastic for plates, 10#, 20#, 20CrMnMo, 30CrMnTi for pins and rollers;
3, Heat treatment: Carburizing, Austemper Stressing, nitro-caburizing harden etc;
4, Surface: Shot peening, black, blue or original;
Detailed Photos
For example of WH78, WH82, WH124, WH111, WH106, WH110, WH132, WH150, WH155
제품 매개변수
포장 및 배송
plastic bag+carton+ OSB Case
Shipping way: these products will be shipped to your local port by sea, these also could be sent to your specific address by air.
우리의 장점
Our chains could be customized according to your actual order quantity, actual drawing and actual requirement. We have own chain process workshop, heat treatment workshop, process equipments and experienced designers.
(01)Assembled workshop
(02)Punching plate workshop
(03)Plate fabrication workshop
(04)Heat treatment workshop
(05)Shot peening workshop
(06) our warehouse
After Sales Service
Our products can be repaired or replaced the new parts with free cost in six months.
| 재료: | 합금 |
|---|---|
| 구조: | Welded Chain |
| 표면 처리: | Carburizing and Quenching |
| 체인 크기: | 153.67mm |
| 특징: | 내열성 |
| Bush Diameter on Inner Link: | 44.50mm |
| 맞춤 설정: | 사용 가능 | 맞춤형 요청 |
|---|
Can a conveyor chain be used in cleanroom environments?
Yes, conveyor chains can be used in cleanroom environments with proper selection and design considerations. Cleanroom environments require stringent control of airborne particles, such as dust, microbes, and contaminants, to maintain high levels of cleanliness. Here are some factors to consider when using a conveyor chain in a cleanroom:
1. 재료 선택:
– Choose a conveyor chain made from materials that are compatible with cleanroom requirements. Stainless steel, plastic, or special coatings are commonly used for their clean and non-contaminating properties.
– Avoid materials that generate excessive particles or contaminants, such as certain types of lubricants or chain coatings.
2. Design Considerations:
– Design the conveyor chain system to minimize particle generation. This includes smooth surfaces, rounded edges, and avoiding areas that can trap or accumulate particles.
– Use sealed or enclosed chain designs to prevent the release of lubricants or contaminants.
– Consider the integration of additional features, such as covers or guards, to further protect the chain and prevent particle ingress.
3. Cleaning and Maintenance:
– Establish a cleaning and maintenance protocol specific to the cleanroom environment. This may include regular cleaning and sanitization procedures to maintain cleanliness standards.
– Use cleaning agents and procedures that are approved for cleanroom use and do not introduce contaminants.
– Regularly inspect the conveyor chain system for any signs of wear, damage, or contamination. Promptly address any issues to ensure the chain’s reliability and cleanliness.
4. Compliance with Cleanroom Standards:
– Ensure that the conveyor chain system meets the cleanliness and particle generation requirements of the specific cleanroom standards or classifications in which it will be used.
– Comply with relevant industry guidelines and regulations, such as ISO standards, when selecting and using conveyor chains in cleanroom environments.
By considering these factors and implementing proper material selection, design considerations, cleaning protocols, and compliance with cleanroom standards, a conveyor chain can be effectively used in cleanroom environments while maintaining the required cleanliness levels.
플라스틱 컨베이어 체인을 사용하는 장점은 무엇인가요?
플라스틱 컨베이어 체인은 기존 금속 체인에 비해 여러 가지 장점을 제공합니다. 주요 장점은 다음과 같습니다.
1. 내식성: 플라스틱 체인은 내식성이 매우 뛰어나 습하거나 부식성 환경에서 사용하기에 이상적입니다. 습기나 화학 물질에 노출되어도 녹슬거나 열화되지 않습니다.
2. 경량성: 플라스틱 체인은 금속 체인보다 훨씬 가벼워 취급 및 설치가 용이합니다. 가벼운 무게 덕분에 컨베이어 시스템의 전체 중량이 줄어들어 작동 중 에너지 절약 효과를 얻을 수 있습니다.
3. 저소음 작동: 플라스틱 체인은 금속 체인에 비해 소음이 적어 더욱 조용한 작업 환경을 제공합니다. 이는 식품 가공이나 포장과 같이 소음 감소가 중요한 산업에서 특히 유용합니다.
4. 마찰 및 마모 감소: 플라스틱 체인은 자체 윤활 특성을 가지고 있어 마찰과 마모를 줄여줍니다. 결과적으로 유지보수 필요성이 감소하고 체인 수명이 연장됩니다. 또한 플라스틱 체인의 매끄러운 표면은 운송 중 제품 손상 위험을 최소화합니다.
5. 유연성 및 모듈성: 플라스틱 체인은 특정 컨베이어 시스템 요구 사항에 맞게 쉽게 맞춤 제작 및 설계할 수 있습니다. 길이, 너비 및 구성 측면에서 유연성을 제공합니다. 또한 플라스틱 체인은 모듈식으로 설계되는 경우가 많아 전체 체인을 교체하지 않고도 손상되거나 마모된 부분을 쉽게 교체할 수 있습니다.
6. 비용 효율성: 플라스틱 컨베이어 체인은 일반적으로 금속 체인에 비해 비용 효율성이 높습니다. 제조 비용이 저렴한 경우가 많고, 수명이 길며 유지 보수 요구 사항이 최소화되어 전체적인 비용을 절감할 수 있습니다.
7. 내화학성: 플라스틱 사슬은 광범위한 화학 물질에 대한 내성이 있어 부식성 물질에 노출될 수 있는 환경에 적합합니다. 오일, 산, 알칼리 및 다양한 세척제와의 접촉에도 견딜 수 있습니다.
전반적으로 플라스틱 컨베이어 체인의 장점으로는 내식성, 경량 설계, 저소음 작동, 마찰 및 마모 감소, 유연성, 비용 효율성, 내화학성 등이 있습니다. 이러한 장점 덕분에 플라스틱 체인은 식품 가공, 포장, 제약, 물류 등 다양한 산업 분야에서 널리 사용되고 있습니다.
What are the common causes of conveyor chain failures?
Conveyor chain failures can occur due to various reasons, and identifying the root cause is crucial for preventing future issues. Here are some common causes of conveyor chain failures:
- Lack of Lubrication: Insufficient or improper lubrication can lead to increased friction and wear on the chain components, resulting in premature failure.
- Excessive Load: Overloading the conveyor chain beyond its rated capacity can cause excessive stress and strain, leading to chain elongation, deformation, or link breakage.
- Misalignment: Improper alignment of the conveyor chain can cause uneven loading and excessive wear on specific areas, leading to chain failure.
- Environmental Factors: Harsh operating environments, such as high temperatures, corrosive substances, or abrasive materials, can accelerate chain wear and corrosion, leading to failure.
- Foreign Objects: The presence of foreign objects or debris on the conveyor system can interfere with the movement of the chain, causing jamming, binding, or chain damage.
- Poor Maintenance: Inadequate maintenance practices, such as irregular inspections, failure to address minor issues promptly, or neglecting to replace worn components, can contribute to chain failures.
- Incorrect Installation: Improper installation, including incorrect tensioning, misalignment, or using incompatible components, can result in premature chain failure.
- Fatigue and Wear: Continuous operation over time can lead to fatigue and wear in the chain, especially in high-speed or heavy-duty applications, resulting in eventual failure.
Regular maintenance, proper lubrication, adequate training for operators, and adherence to manufacturer guidelines can help mitigate these common causes of conveyor chain failures. Conducting routine inspections, promptly addressing issues, and replacing worn components can also significantly extend the life of the conveyor chain.
editor by CX 2023-10-24
