Ürün Açıklaması
Detailed Photos
Ürün Açıklaması
An overhead conveyor is a type of conveyor system that is installed above the working area, typically in a manufacturing or industrial setting. It is used to move products, materials, or components from 1 point to another in a factory or warehouse, and is particularly useful for transporting heavy or bulky items that are difficult to move manually.
Overhead conveyors are commonly used in a variety of applications, such as automotive assembly lines, food and beverage processing, material handling and distribution, and storage and retrieval systems. They can be used for both horizontal and vertical transportation and can move products along a fixed path or in a continuous loop.
Some specific uses of overhead conveyors include:
Assembly line transportation: Overhead conveyors are commonly used in manufacturing assembly lines to transport parts and components to different workstations along the line.
Powder coating: Overhead conveyors are used in powder coating operations to move products through a paint booth, where they are coated with a dry powder before being cured in an oven.
| Spare parts item | Features | Photo |
| Up-Down track | for rising or falling areas. standard diameter is 1.2 meters,180º angle. it can be cut based on any necessary angles of any install conditions.the angle should not be more than 45º angle. the distance between 2 adjiacent hangers should be considered. | |
| Check track | There is a hatch which can open the track, through the hatch, worker can dismantle or install, check or maintain the conveying chains. Driving device for each conveying route is usually located between driver and take-up device for easy checking and maintenace. | |
| Take-up device (Tensioner) | Keep the chains in the state of original tension and compensate for the tensile deformation caused by tensile force or telescopic deformaton caused by varied temperature while working. Make sure certain tensile force between driver and take-up device. Install it behind driver about distance 3~6 meters. Better have no up-down track behind take-up device. | |
| Straight track | for where conveyor chain go straight. it can be cut according to the specific install condition. standard length is 3 meters. | |
| Caterpiller driver device | Two types-Standard type and heavy duty type. The driving device adjust the momentum that the motor ouput, after speed reduction unit increase its power which is to be passed to the driver caterpiller, the pusher dogs on which transport the chain so that chain can move forward. | |
| Hanger | Several types hangers: Cross type hanger; Y type hanger; I type hanger; Sprocket wheel hanger; U-type hanger; Bearing hanger; Customized. | |
| Automatic oil sprayer | Specially designed for various automatic conveying chain; More convenient to check oil-feeding diyusyion nsdrf CHINAMFG oil volume in the transparent oil pipes. |
SSS
Q1: Are you trading company or manufacturer ?
A: We are factory.
Q2: How long is your delivery time and shipment?
1.Sample Lead-times: generally 30 workdays.
2.Production Lead-times: 60 workdays after getting your deposit.
Q3. What is your terms of payment?
A: T/T 30% as deposit, and 70% before delivery.
We’ll show you the photos of the products and packages before you pay the balance.
Q4: What is your advantages?
1. Manufacturer,the most competitive price and good quality.
2. Perfect technical engineers give you the best support.
3. OEM is available.
4. Rich stock and quick delivery.
Q5. If you can’t find the product on our website,what do you next?
Please send us inquiry with product pictures and drawings by email or other ways and we’ll check
/* 22 Ocak 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
| Malzeme: | Alaşım |
|---|---|
| Yapı: | Makaralı Zincir |
| Yüzey İşlemi: | Parlatma |
| Özelleştirme: | Mevcut | Özelleştirilmiş Talep |
|---|
.shipping-cost-tm .tm-status-off{background: none;padding:0;color: #1470cc}
| Nakliye Ücreti: Birim başına tahmini nakliye ücreti. | Kargo ücreti ve tahmini teslim süresi hakkında bilgi. |
|---|
| Ödeme yöntemi: |
|
|---|---|
| İlk Ödeme Tam Ödeme |
| Para birimi: | US$ |
|---|
| İade ve geri ödemeler: | Ürünleri teslim aldıktan sonraki 30 güne kadar iade talebinde bulunabilirsiniz. |
|---|
Tavan tipi konveyör zincir sisteminin kullanımının faydaları nelerdir?
Tavan tipi konveyör zincir sistemi kullanmak, çeşitli endüstriyel uygulamalarda birçok avantaj sunmaktadır. İşte bazı önemli avantajlar:
1. Alan Optimizasyonu:
– Tavan tipi konveyör zincir sistemleri, dikey alanı kullanarak zemin alanının verimli bir şekilde kullanılmasını sağlar. Bu, özellikle sınırlı zemin alanına sahip tesislerde faydalıdır, çünkü çalışma alanını engellemeden verimli malzeme taşıma ve üretim akışı sağlar.
2. Esneklik ve Çok Yönlülük:
– Tavan tipi konveyör zincirleri, güzergah belirlemede esneklik sunar ve tesisin özel yerleşim gereksinimlerine uyacak şekilde özelleştirilebilir. Montaj hatları, boya kabinleri, depolama alanları ve daha fazlası dahil olmak üzere farklı alanlardan geçebilirler. Tavan tipi sistemlerin çok yönlülüğü, verimli ve uyarlanabilir malzeme hareketine olanak tanır.
3. Geliştirilmiş Güvenlik:
– Üstten geçen konveyör zincirleri, zemin seviyesindeki engelleri en aza indirerek takılma tehlikelerini ve kazaları azaltır. Operatörler ve işçiler, konveyör sisteminden kaynaklanan herhangi bir müdahale olmadan çalışma alanında güvenli bir şekilde hareket edebilirler.
4. Ürün Koruması:
– Üstten geçen konveyör zincirleri, taşınan ürünler için daha iyi koruma sağlar. Ürünleri yüksekte ve toz, döküntü veya dökülme gibi zemindeki potansiyel tehlikelerden uzakta tutarak, ürün hasarı veya kirlenme riski azaltılır.
5. Verimlilikte Artış:
– Tavan tipi konveyör sistemleri, sürekli malzeme akışını kolaylaştırarak ve manuel elleçlemeyi azaltarak üretim verimliliğini artırabilir. Malzemelerin otomatik olarak yüklenmesini ve boşaltılmasını sağlayarak daha hızlı işlem sürelerine ve genel verimliliğin artmasına yol açarlar.
6. Kolay Bakım:
– Tavan tipi konveyör zincirleri genellikle kolay bakım için tasarlanmıştır. Zincirler, arabalar ve tahrik sistemleri gibi bileşenlere kolayca erişilebilir ve bakımları yapılabilir, bu da arıza süresini ve bakım maliyetlerini en aza indirir.
7. Özelleştirme ve Entegrasyon:
– Tavan tipi konveyör zincirleri, yük kapasitesi, hız ve kontrol sistemleri de dahil olmak üzere belirli uygulama gereksinimlerini karşılayacak şekilde özelleştirilebilir. Ayrıca, malzeme taşıma sürecini daha da optimize etmek için robotik iş istasyonları veya sıralama mekanizmaları gibi diğer otomatik sistemlerle entegre edilebilirler.
Genel olarak, tavan tipi konveyör zincir sistemi kullanmak, endüstriyel ortamlarda verimli malzeme taşıma sağlar, alan kullanımını en üst düzeye çıkarır, güvenliği artırır ve verimliliği iyileştirir.
How do you select the appropriate lubricant for a conveyor chain?
Selecting the right lubricant is crucial for maintaining the performance and longevity of a conveyor chain. Here are the key factors to consider when choosing a lubricant:
1. Chain Type and Material: Different conveyor chains may have specific requirements for lubrication based on their construction materials and design. Consult the manufacturer’s recommendations or specifications to determine the lubricant compatibility.
2. Operating Conditions: Consider the operating environment, such as temperature, humidity, and presence of contaminants. For high-temperature applications, choose a lubricant with a higher temperature tolerance. In wet or dusty environments, opt for lubricants that offer excellent resistance to water washout and provide effective protection against contaminants.
3. Load and Speed: Evaluate the load capacity and speed of the conveyor chain. Higher loads and speeds may require lubricants with better film strength and anti-wear properties to reduce friction and prevent premature wear.
4. Lubrication Method: Determine the lubrication method that will be used for the conveyor chain. Lubricants can be applied through drip systems, brushes, spray nozzles, or automatic lubrication systems. Consider the viscosity and consistency of the lubricant to ensure proper application and distribution.
5. Food-Grade Requirements: In food processing or pharmaceutical applications, where direct contact with the product may occur, it’s essential to use food-grade lubricants that meet industry regulations and requirements for safety and hygiene.
6. Maintenance Schedule: Consider the desired maintenance intervals and the lubricant’s longevity. Some lubricants may require more frequent reapplication, while others provide longer-lasting lubrication.
7. Compatibility with Other Materials: Take into account the compatibility of the lubricant with other materials in the conveyor system, such as seals, gaskets, and paints. Ensure that the lubricant does not cause any adverse effects on these components.
It is recommended to consult with lubricant manufacturers or industry experts to select the most suitable lubricant for your specific conveyor chain application. They can provide guidance based on their expertise and knowledge of lubricant formulations and performance characteristics.
How do you optimize the efficiency of a conveyor chain system?
To optimize the efficiency of a conveyor chain system, several factors should be considered and implemented:
1. System Design: Ensure that the conveyor system is properly designed to minimize energy losses, reduce friction, and optimize material flow. Consider factors such as conveyor length, incline/decline angles, and the number and placement of drive units to achieve efficient operation.
2. Chain Selection: Select the appropriate conveyor chain based on the specific application requirements, such as load capacity, speed, and environmental conditions. Consider factors like chain material, pitch, and strength to ensure optimal performance and longevity.
3. Lubrication: Proper lubrication of the conveyor chain is essential for reducing friction, wear, and power consumption. Choose the right lubricant for the application and regularly maintain the lubrication levels to ensure smooth chain operation.
4. Tensioning and Alignment: Regularly inspect and adjust the tension and alignment of the conveyor chain to prevent excessive slack or tightness. Proper tensioning and alignment help to minimize chain wear, reduce energy losses, and ensure consistent performance.
5. Preventive Maintenance: Implement a regular maintenance program to identify and address potential issues before they escalate. This includes cleaning the chain, inspecting sprockets and guides, replacing worn components, and checking for proper tension and alignment. A well-maintained system reduces downtime and extends the life of the chain.
6. System Monitoring: Utilize monitoring tools such as sensors, cameras, or automated systems to track the performance of the conveyor chain system. Monitoring can provide valuable data on chain tension, alignment, speed, and power consumption, allowing for timely adjustments and optimization.
7. Training and Operator Awareness: Train operators on best practices for operating and maintaining the conveyor chain system. Promote awareness of energy efficiency, proper handling, and safety protocols to ensure optimal system performance.
By considering these factors and implementing appropriate measures, the efficiency of a conveyor chain system can be optimized, leading to improved productivity, reduced energy consumption, and longer chain life.
editor by CX 2024-03-30
